Why are choosing genuine oils so important?
Engine oils play a vital role in protecting engines and systems. Our full line of genuine mtu oils is formulated specifically for mtu equipment based on intensive research.
As the only oils approved by mtu for use in mtu engines, mtu oils ensure optimum performance by protecting your engine from harmful wear, corrosion and particles. Every component is designed and engineered to meet mtu’s legendary standards.
Value Spares Consumables
Coolant CS 100
Corrosion Inhibitor Concentrate
Description
Coolant CS 100 protects against cavitation and corrosion of all metalsand alloys used in cooling systems such as aluminium, ferrous and yellowmetals. This coolant can be used in regions where frost protection is nota requirement.
Benefits
– Tested and approved for MTU engines
– Expertly designed to maximize engine life
– All-around corrosion protection of the cooling system
– Excellent thermal transfer characteristics
– Cost-effective because low quantities are required
– Free from nitrites, amines and phosphates and
– environmentallyfriendly
Coolant CS 100 is approved for the following engine series:
– Series 099 Marine
– Series 183 Marine/Rail
– Series 396 Marine
– Series 396 TB Marine/Genset/Rail
– Series 396 TC/TE Marine/Genset/C&I/Rail
– Series 956-01/956-02 Marine/Genset
– Series 956 TB33 Genset (from 2009 manufacture year)
– Series 1163-02 Marine/Genset
– Series 2000 Marine/Genset/C&I (except of 2000-06, all applications)
– Series 4000-01/02/03 Marine/Genset/C&I/Rail/Off-Shore
– Series 4000-04 Frac
– Series 4000 Gas engine
– Series 8000 Marine
– Series 60 Marine
– Detroit Diesel 2-Cycle engines
Typical Characteristics
|
Color |
Green |
|
Mixing ratios and |
10% CS 100 /90% water For preparation of the coolant use clean water. For theaccurate requirements of water, please refer to the respectiveFluids and Lubricats Specification. |
|
Storage stability |
At least three years when stored in original.sealed (unopened), air-tight containers attemperatures of max.30°C |
|
Change intervals |
6000 hours or 2 years, whichever comes first |
|
Part No. |
Designation |
Container |
|
X00057233 |
Coolant CS 100 |
20 Liters |
|
X00057232 |
Coolant CS 100 |
210 Liters |
Health and Safety
For information on proper use for health, safety and environment, pleaserefer to the Material Safety Data Sheet (MSDS) and the respective Fluidsand Lubricants Specification. The data is available upon request throughyour sales contact. If disposing the used product, take care to protectthe environment.
